Accessories and spare parts BZ 103A

For smooth operation of our pneumatic tools, please be sure to observe the information in our operating manuals!

No.Item no.Description
5321101000016Front sleeve
6321102000006Mandrel capture comple
7321102000007Release valve
12321101000027Oil drain plug including o-ring
19321102000016Trigger
20321102000017Closing cap mandrel capture
27321102000023M12 x 1 capture nut
28321121000121Vacuum nozzle
29321102000025Spacer
No.Item no.Description
38321102000036Pressure spring trigger
48321101000042O-ring 150 x 20 NBR 90° Shore
63311045000013Pressure spring clamping mechanism
64311045000010Clamping sleeve
65321070000241Clamping jaws (1 set = 3 pcs)
66311055000020Guide sleeve
71321082000010Mandrel collector

Standard nosepieces

No.Item no.Description
67321070000240Standard nosepiece 2.4 mm
68321085000123Standard nosepiece 3.0/3.2 mm
69321085000124Standard nosepiece 4.0 mm
70321085000125Standard nosepiece 4.8/5.0 mm

Special nosepieces

For recessed riveting points

Item no.Description
321103932070Extended nosepiece (7 mm) 3.0/3.2 mm
321103940075Extended nosepiece (7 mm) 4.0 mm
321103950070Extended nosepiece (7 mm) 4.8/5.0 mm
321103932200Extended nosepiece (20 mm) 3.0/3.2 mm
321103940200Extended nosepiece (20 mm) 4.0 mm
321103950200Extended nosepiece (20 mm) 4.8/5.0 mm

For burr-free setting of closed blind rivets

Item no.Description
321085009124CERTO-nosepiece 4.0 mm
321085009125CERTO-nosepiece 4.8/5.0 mm

Special nosepieces can be produced at short notice for specific customer applications.

For 5.0 mm large dome head blind rivets

Item no.Description
321085000511Facade nosepiece head 11.0 mm
321085000514Facade nosepiece head 14.0 mm
321085000516Facade nosepiece head 16.0 mm

For FERO-BOLT 4.8 mm high-strength blind rivets

Item no.Description
321101008401Nosepiece FERO-BOLT 4.8 mm

For 5.2 mm folding blind rivets

Item no.Description
321103716052Nosepiece for folding blind rivets 5.2 mm

Angular rivet heads

Angular rivet heads in order to be able to set blind rivets even in places that are difficult to reach.

Angular rivet heads

Extended front sleeves

Extended front sleeves are ideally suited for reaching recessed riveting positions.

Extended front sleeves

Pneumatic accessories for BZ and VNG tools

No.Item no.Description
1321121000053-3-1Angular pivoting fitting aluminium incl hose with 1/8" outside thread and hose coupling
2321121000053-1-1Pivoting threaded pipe angle, aluminium
3321121000053-2-1Pivoting threaded pipe angle, stainless steel
4321121000021Valve extension R1/8" inside thread R1/4" outside thread
5321121000057Screw-in hose connector -set- G 1/4" 6 mm
6321121000058Screw-in hose connector -set- G 1/4" 9 mm
Nn.Item no.Description
7320848000009Plug connection 7 mm G 3/8" for compressed-air sevice unit
8320848000012Plug connection 7 mm G 1/4" for pivoting threaded pipe angle
9320848000010Coupling G 1/4"
10320848000004Pressure controller 7 bar
11321101006467Oil re-fill unit for all tools of BZ- and VNG-series
12320848000005Compressed air spiral hose incl coupling and plug connection - length 4 m
12320848000006Compressed air spiral hose incl coupling and plug connection - length 6 m
12320848000008Compressed air spiral hose incl coupling and plug connection - length 8 m

Characteristics of the compressed air used

Important for maintaining a good performance and avoiding damage are the characteristics of the compressed air used.

  • clean
  • dry
  • Contains oil (VNG devices)
  • Condensation hinders the lubrication and causes corrosion inside the tool!
  • The motors have to be continuously lubricated.

For BZ tools water trap / pressure reducer

Filter pressure regulator G3/8" with manometer, plastic protective cage, mounting bracket, G3/8" plug connection and quick-coupler.

Item no. 320848000001

320848000003Replacement filter for filter regulator
3208480000111 litre of pneumatic motor oil
321101000091Wind deflector BZ tools