Rivdom maintenance and service

All tools must be checked and maintained regularly. Various problems can be solved with this guide.

Clamping jaws

Dirty clamping jaws
clean or throw away the clamping jaws.
Clean clamping jaws
Do not use grease spray for the clamping jaws
Use lubricating grease from the tube for the clamping jaws
Lightly grease the outside of the clamping jaws only

Mandrel discharge

Two defective mandrel discharge tubes
Mandrel discharge tube
Properly insert the mandrel discharge tube into the battery riveter

Assembly

Nosepiece not screwed on properly
Tighten the nosepiece
Nosepiece correctly installed
Nosepiece not screwed on properly
Tighten the nosepiece
Nosepiece correctly installed
Nosepiece not screwed on properly
Tighten the nosepiece
Nosepiece correctly installed
Nosepiece not screwed on properly
Tighten the nosepiece
Nosepiece correctly installed

Nosepiece

Rivet pulled with a nosepiece that was too large.
Check the size of the rivet and choose the right nosepiece.
Rivet mandrel correctly pulled.

Mandrel container

Sensor for the mandrel container
Mandrel container
Mandrel container properly attached
The mandrel container is too full
Empty container
Fill the mandrel container half full at most